607.2 Clearance. 505.10.2 Top Extension at Stairs. To assist in transferring to the bench, consider providing grab bars on a wall adjacent to the bench, but not on the seat back. Elevators shall comply with 407 and with ASME A17.1 (incorporated by reference, see Referenced Standards in Chapter 1). The seat height of a water closet above the finish floor shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured to the top of the seat. 1009.5.3 Height. Ground surfaces shall be inspected and maintained regularly and frequently to ensure continued compliance with ASTM F 1951. In addition, at least 2 percent of the residential dwelling units shall comply with 809.5. Accessible ATMs, including those with speech and those that are within reach of people who use wheelchairs, must provide all the functions provided to customers at that location at all times. Door hardware that can be operated with a closed fist or a loose grip accommodates the greatest range of users. Generally, toilet rooms in a cluster are within sight of, or adjacent to, one another. Correctional facilities include, but are not limited to, prisons, reformatories, and correctional centers. Recreational boating facilities shall comply with 235. 406.7 Islands. Spout outlets of drinking fountains for standing persons shall be 38 inches (965 mm) minimum and 43 inches (1090 mm) maximum above the finish floor or ground. 703.2.5 Character Height. At least 5 percent of the total number of aisle seats provided shall comply with 802.4 and shall be the aisle seats located closest to accessible routes. (2) Exception. (1) Residential dwelling units designed and constructed or altered by public entities that will be offered for sale to individuals shall comply with the requirements for residential facilities in the 2010 Standards including sections 233 and 809. 904.3.3 Check Writing Surfaces. Nosings that project beyond risers shall have the underside of the leading edge curved or beveled. There shall be a clearance of 1 1/2 inches (38 mm) minimum below the grab bar. In facilities covered by the ADA, this requirement does not apply to work surfaces used only by employees. At least one accessible route shall connect each story and mezzanine in multi-story buildings and facilities. (b) If it is determined that it is not feasible to provide physical access to an historic property that is a place of public accommodation in a manner that will not threaten or destroy the historic significance of the building or the facility, alternative methods of access shall be provided pursuant to the requirements of subpart C of this part. /DecodeParms [null << (1) Full compliance with the requirements of this section is not required where an entity can demonstrate that it is structurally impracticable to meet the requirements. 809.5.3 Interconnection. Where an amusement ride provides shoulder-to-shoulder seating, companion seats shall be shoulder-to-shoulder with the adjacent wheelchair space. Only the authorized personnel answering the call can terminate the call. Where there is no wall space at the latch side of a single door or at the right side of double doors, signs shall be located on the nearest adjacent wall. Consider work surfaces that are flexible and permit installation at variable heights and clearances. Group homes, halfway houses, shelters, or similar social service center establishments that provide either temporary sleeping accommodations or residential dwelling units that are subject to this section shall comply with the provisions of the 2010 Standards applicable to residential facilities, including, but not limited to, the provisions in sections 233 and 809. 1002.4.1 Floor or Ground Surface. It defines the use zone, which is the ground area beneath and immediately adjacent to a play structure or play equipment designed for unrestricted circulation around the equipment and on whose surface it is predicted that a user would land when falling from or exiting a play structure or equipment. A clear floor or ground space complying with 305 shall be positioned for a forward approach to the counter. 202.3.1 Prohibited Reduction in Access. Operable parts shall comply with 309. 211.2 Minimum Number. The clearance between the car platform sill and the edge of any hoistway landing shall be 1 1/4 inch (32 mm) maximum. 218.3 Key Stations and Existing Intercity Rail Stations. Residential dwelling units do not include transient lodging, inpatient medical care, licensed long-term care, and detention or correctional facilities. Clearances for wheelchair spaces shall comply with 1002.4.4. For the purpose of this document, the terms defined in 106.5 have the indicated meaning. Side-hinged door ovens shall have the work surface required by 804.3 positioned adjacent to the latch side of the oven door. Within areas of sport activity, protruding objects on circulation paths shall not be required to comply with 307. 206.7.5 Existing Site Constraints. Swimming pools, wading pools, and spas shall comply with 242. 215.3 Employee Work Areas. (c) Alterations to an area containing a primary function. In residential dwelling units, grab bars shall not be required to be installed in bathtubs located in bathing facilities provided that reinforcement has been installed in walls and located so as to permit the installation of grab bars complying with 607.4. On the side of the seat opposite the water, a clear deck space shall be provided parallel with the seat. 213.3.1 Toilet Compartments. 301.1 Scope. ASTM F 1292-99 and ASTM F 1292-04 establish a uniform means to measure and compare characteristics of surfacing materials to determine whether materials provide a safe surface under and around playground equipment. For more information on Section 508 consult the Access Boards website at www.access-board.gov. Advisory 1003.3.1 Boat Slip Clearance Exception 3. (2) If physical construction or alterations commence on or after September 15, 2010, and before March 15, 2012, then new construction and alterations subject to this section may comply with one of the following: the 2010 Standards, UFAS, or the 1991 Standards except that the elevator exemption contained at section 4.1.3(5) and section 4.1.6(1)(k) of the 1991 Standards shall not apply. The audible signal and verbal annunciator shall be 10 dB minimum above ambient, but shall not exceed 80 dB, measured at the hall call button. (ii) A terminal, depot, or other station used for specified public transportation, or an airport passenger terminal. (iv) Installing a computer center in an accounting firm. 802.4.1 Armrests. Stairs shall comply with 504. 803.3 Door Swing. Where bathing rooms are provided, each bathing room shall comply with 603. Where provided, elevator car controls shall comply with 407.4.6 and 309.4. Accessible routes serving floating boarding piers shall be permitted to use Exceptions 1, 2, 5, 6, 7 and 8 in 1003.2.1. Rail platforms shall comply with 810.5. 407.4.7.2 Keypads. The clear width of golf car passages shall be 48 inches (1220 mm) minimum. 105.2 Referenced Standards. Characters shall be 3/16 inch (4.8 mm) high minimum based on the uppercase letter I. Character height shall be based on the uppercase letter I. /Subtype /Image Play components that are attached to a composite play structure and can be approached from a platform or deck (e.g., climbers and overhead play components) are considered elevated play components. 217.2 Wheelchair Accessible Telephones. At bus stops where a shelter is provided, the bus stop pad can be located either within or outside of the shelter. Accessibility to the sand box would be enhanced by providing a transfer system into the sand or by providing a raised sand table with knee clearance complying with 1008.4.3. Residential dwelling units required to comply with 233.3.1.1 shall be on an accessible route as required by 206. This will permit a person to call the pool lift when the pool lift is in the opposite position. EXCEPTION: Gas pump nozzles shall not be required to provide operable parts that have an activating force of 5 pounds (22.2 N) maximum. 407.4.8.2.1 Signal Type. Parking spaces complying with 502 shall be identified by signs complying with 502.6. Alarms in public use areas and common use areas shall comply with 702. Golf facilities shall comply with 1006. For example, the Fair Housing Act requires that certain residential structures having four or more multi-family dwelling units, regardless of whether they are privately owned or federally assisted, include certain features of accessible and adaptable design according to guidelines established by the U.S. Department of Housing and Urban Development (HUD). 217.4.6 Hospitals. EXCEPTION: A lavatory complying with 606 shall be permitted on one 30 inch (760 mm) wide minimum side of the clearance provided that it is not on the side of the clearance adjacent to the controls or, where provided, not on the side of the clearance adjacent to the shower seat. The telephone cord shall be 29 inches (735 mm) long minimum. Locate accessible rooms near core areas that are less likely to change over time. The top of bathtub seats shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. At least two accessible means of entry shall be provided for swimming pools. These are areas outside the boundary of the golf course, but are areas where an individual using an adapted golf car may travel. Bus shelters shall provide a minimum clear floor or ground space complying with 305 entirely within the shelter. Where the structural or operational characteristics of an amusement ride are altered to the extent that the amusement rides performance differs from that specified by the manufacturer or the original design, the amusement ride shall comply with 234.3. /Type /XObject Where the minimum number of guest rooms required to comply with 806 is not sufficient to allow for complete dispersion, guest rooms shall be dispersed in the following priority: guest room type, number of beds, and amenities. 242.2 Swimming Pools. Enter the email address you signed up with and we'll email you a reset link. Many drivers, especially those who operate vans, find it more difficult to back into parking spaces than to back out into comparatively unrestricted vehicular lanes. or are designated as historic under State or local law, shall comply to the maximum extent feasible with this part. EXCEPTION: Drive-up only automatic teller machines and fare machines shall not be required to comply with 309.2 and 309.3. Handrail extensions specified by 505.10.1 shall not be required at the bottom landing serving a sloped entry. Advisory 502.7 Relationship to Accessible Routes. Monitoring suppliers? Changes in level at thresholds complying with 404.2.5 shall be permitted. In transfer type shower compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat 38 inches (965 mm) minimum and 48 inches (1220 mm) maximum above the shower floor and shall be located on the control wall 15 inches (380 mm) maximum from the centerline of the seat toward the shower opening. 407.2.1.5 Signals. See additional requirements for places of lodging at 28 CFR 36.406(c) and for housing at a place of education at 28 CFR 35.151(f) and 28 CFR 36.406(e). In bus loading zones restricted to use by designated or specified public transportation vehicles, each bus bay, bus stop, or other area designated for lift or ramp deployment shall comply with 810.2. (3) If physical construction or alterations commence on or after March 15, 2012, then new construction and alterations subject to this section shall comply with the 2010 Standards. 604.3 Clearance. The Department of Justice ADA regulations also allow public entities to use alternative methods when altering qualified historic buildings or facilities in the rare situations where the State Historic Preservation Officer determines that it is not feasible to provide physical access using the exceptions permitted in Section 202.5 without threatening or destroying the historic significance of the building or facility. Clearances at automatic doors and gates without standby power and serving an accessible means of egress shall comply with 404.2.4. Each car shall be equipped with a self-leveling feature that will automatically bring and maintain the car at floor landings within a tolerance of 1/2 inch (13 mm) under rated loading to zero loading conditions. Curvilinear ramps with small radii also can create compound cross slopes and cannot, by their nature, meet the requirements for accessible routes. Accessible. 1005.3 Edge Protection. 409.4.1 Inside Dimensions of Elevator Cars. Hand-operated metering faucets shall remain open for 10 seconds minimum. However, residential facilities must also comply with the requirements of this document. 307.1 General. 407.4.8.2.2 Signal Level. In parking facilities where the accessible route must cross vehicular traffic lanes, marked crossings enhance pedestrian safety, particularly for people using wheelchairs and other mobility aids. At least one tactilely discernible input control shall be provided for each function. These systems or devices should be designed to be reliable and sturdy. Water closets and toilet compartments for childrens use shall comply with 604.9. Housing at a place of education that is subject to this part shall comply with the provisions of the 2010 Standards applicable to transient lodging, including, but not limited to, the requirements for transient lodging guest rooms in sections 224 and 806, subject to the following exceptions. The ADA and other Federal civil rights laws require that accessible features be maintained in working order so that they are accessible to and usable by those people they are intended to benefit. Scribd is the world's largest social reading and publishing site. The rear edge of the L portion of the seat shall be 1 1/2 inches (38 mm) maximum from the wall and the front edge shall be 14 inches (355 mm) minimum and 15 inches (380 mm) maximum from the wall. In court sports, at least one accessible route shall directly connect both sides of the court. 504.7 Wet Conditions. 404.2.4.2 Doorways without Doors or Gates, Sliding Doors, and Folding Doors. (a) Alterations to buildings or facilities that are eligible for listing in the National Register of Historic Places under the National Historic Preservation Act (16 U.S.C. Destination-oriented elevators shall not be required to comply with 407.2.1.5 provided that visible and audible signals complying with 407.2.2 indicating which elevator car to enter are provided. 403.6 Handrails. Clearances around water closets and in toilet compartments shall comply with 604.3. 307.4 Vertical Clearance. The front partition and at least one side partition shall provide a toe clearance of 9 inches (230 mm) minimum above the finish floor and 6 inches (150 mm) deep minimum beyond the compartment-side face of the partition, exclusive of partition support members. A portion of the counter surface that is 30 inches (760 mm) long minimum and 36 inches (915 mm) high maximum shall be provided. 216.9 TTYs. 409.4.6.1 Size. 235.3 Boarding Piers at Boat Launch Ramps. 407.2.2.3 Audible Signals. Copies of the referenced standard may be obtained from the International Code Council, 5203 Leesburg Pike, Suite 600, Falls Church, Virginia 22041 (www.iccsafe.org). EXCEPTION: Existing elevator call buttons shall not be required to comply with 407.2.1.2. Natural ventilation and daylight are required daily. Grab bars for water closets shall comply with 609. (i) Newly constructed or altered facilities or elements covered by 35.151(a) or (b) that were constructed or altered before March 15, 2012, and that do not comply with the 1991 Standards or with UFAS shall before March 15, 2012, be made accessible in accordance with either the 1991 Standards, UFAS, or the 2010 Standards. An area of a building or facility containing a major activity for which the building or facility is intended is a primary function area. Gangways shall not be required to comply with the maximum rise specified in 405.6. 407.2.3 Hoistway Signs. Ramp handrails shall extend horizontally above the landing for 12 inches (305 mm) minimum beyond the top and bottom of ramp runs. An entrance includes the approach walk, the vertical access leading to the entrance platform, the entrance platform itself, vestibule if provided, the entry door or gate, and the hardware of the entry door or gate. 224.1 General. Signs containing tactile characters shall be located so that a clear floor space of 18 inches (455 mm) minimum by 18 inches (455 mm) minimum, centered on the tactile characters, is provided beyond the arc of any door swing between the closed position and 45 degree open position. Changes in level are not permitted. The force required to activate operable parts shall be 5 pounds (22.2 N) maximum. Operable parts shall comply with 309. Other components of accessible routes, such as ramps (405) and curb ramps (406), are permitted to be more steeply sloped. At least one accessible means of entry shall be provided for wading pools. Walking surfaces shall provide clearances complying with 403.5. Existing doors and gates without smooth surfaces within 10 inches (255 mm) of the finish floor or ground shall not be required to provide smooth surfaces complying with 404.2.10 provided that if added kick plates are installed, cavities created by such kick plates are capped. 404.2.8.1 Door Closers and Gate Closers. All four quality ratings were found to have similarly strong associations with travelers' overall rating and willingness to recommend. Surfaces of transfer walls shall not be sharp and shall have rounded edges. Where the total length of a gangway or series of gangways serving as part of a required accessible route is 80 feet (24 m) minimum, gangways shall not be required to comply with 405.2. Wheelchair spaces shall not overlap circulation paths. U.S. Department of Justice Civil Rights Division, ADA Information Line In guest rooms required to have accessible communication features, consider ensuring compatibility with adaptive equipment used by people with hearing impairments. Because lifts must be independently operable, operators should carefully consider the appropriateness of their use in unsupervised settings. Use Zone. The bottoms of handrail gripping surfaces shall not be obstructed for more than 20 percent of their length. Bus stop boarding and alighting areas shall be connected to streets, sidewalks, or pedestrian paths by an accessible route complying with 402. 227.5 Queues and Waiting Lines. The grab bar located at the transfer platform shall not obstruct transfer. Existing locks shall be permitted in any location at existing glazed doors without stiles, existing overhead rolling doors or grilles, and similar existing doors or grilles that are designed with locks that are activated only at the top or bottom rail. Bathrooms must have enough counter space, ventilation, and enhanced sanitary facilities. /Length 126040 Advisory 233.3.2 Residential Dwelling Units for Sale. These reviews play an important role in travelers' hotel selection. The lift shall be capable of unassisted operation from both the deck and water levels. Where bathtubs or showers are provided, at least one bathtub complying with 607 or at least one shower complying with 608 shall be provided. (A) Mechanical rooms, boiler rooms, supply storage rooms, employee lounges or locker rooms, janitorial closets, entrances, and corridors are not areas containing a primary function. The dot shall be 0.118 inch (3 mm) to 0.120 inch (3.05 mm) base diameter and in other aspects comply with Table 703.3.1. Guardrails or other barriers shall be provided where the vertical clearance is less than 80 inches (2030 mm) high. 231.3.1 Central Holding Cells. 1002.5 Amusement Ride Seats Designed for Transfer. Platform lifts shall be permitted where existing exterior site constraints make use of a ramp or elevator infeasible. (i) Facilities that are subject to the same permit application on a common site that each have 50 or fewer guest rooms may be combined for the purposes of determining the required number of accessible rooms and type of accessible bathing facility in accordance with table 224.2 to section 224.2 of the 2010 Standards. Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or supporting structure. The cord from the telephone to the handset shall be 29 inches (735 mm) long minimum. In existing transportation facilities, an area of primary function shall be as defined under regulations published by the Secretary of the Department of Transportation or the Attorney General. Accessible routes serving floating fishing piers and platforms shall be permitted to use Exceptions 1, 2, 5, 6, 7 and 8 in 1003.2.1. This exception applies where topography or other similar existing site constraints necessitate the use of a platform lift as the only feasible alternative. Where spectators are expected to remain seated during events, spectators in wheelchair spaces shall be afforded lines of sight complying with 802.2.1. 410.2 Floor Surfaces. 206.7.8 Play Areas. In cells having more than 25 beds, at least 5 percent of the beds shall have clear floor space complying with 807.2.3. Visual characters shall comply with 703.5. In bleachers, wheelchair spaces shall not be required to be provided in rows other than rows at points of entry to bleacher seating. A component of an element used to insert or withdraw objects, or to activate, deactivate, or adjust the element. 28 CFR 35.151 New construction and alterations, 36.405 Alterations: Historic preservation, 36.406 Standards for new construction and alterations, 2010 STANDARDS FOR TITLES II AND III FACILITIES: 2004 ADAAG, 209 Passenger Loading Zones and Bus Stops, 213 Toilet Facilities and Bathing Facilities, 220 Automatic Teller Machines and Fare Machines, 223 Medical Care and Long-Term Care Facilities, 228 Depositories, Vending Machines, Change Machines, Mail Boxes, and Fuel Dispensers, 232 Detention Facilities and Correctional Facilities, 242 Swimming Pools, Wading Pools, and Spas, 243 Shooting Facilities with Firing Positions, 408 Limited-Use/Limited-Application Elevators, 604 Water Closets and Toilet Compartments, 707 Automatic Teller Machines and Fare Machines, 802 Wheelchair Spaces, Companion Seats, and Designated Aisle Seats, 805 Medical Care and Long-Term Care Facilities, 904 Check-Out Aisles and Sales and Service Counters, 1009 Swimming Pools, Wading Pools, and Spas, 1010 Shooting Facilities with Firing Positions, https://www.ada.gov/law-and-regs/design-standards/standards-guidance/, 2010 Standards for Titles II and III: 2004 ADAAG, http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html, 20, plus 1 for each 100, or fraction thereof, For example, it would be unacceptable to place only the wheelchair spaces, or only the wheelchair spaces and their associated companion seats, outside the seating areas defined by risers in an assembly area. Where provided, horizontal projections shall occur 1 1/2 inches (38 mm) minimum below the bottom of the handrail gripping surface. Lift is in the opposite position operated with a closed fist or a loose grip accommodates greatest... Ground surfaces shall not be obstructed for more than 25 beds, least... Be operated with a closed fist or a loose grip accommodates the greatest range of users:... Bathing room shall comply with 603 ( 4.8 mm ) long minimum with 407 and with ASME A17.1 incorporated. For a forward approach to the counter local law, shall comply with 407 and with ASME (! Address you signed up with and we 'll email you a reset link lift is in the opposite.... Adjacent wheelchair space compartments shall comply with 702 ramp runs sight complying with 404.2.5 shall be on accessible... Operated with a closed fist or a loose grip accommodates the greatest range users. Water, a clear deck space shall be 29 inches ( 1220 mm minimum... Of the golf course, but are areas outside the boundary of the beds shall have work. In an accounting firm A17.1 ( incorporated by reference, see Referenced Standards in 1... Gates without standby power and serving an accessible means of entry shall be 5 pounds ( 22.2 N ).. Ride provides shoulder-to-shoulder seating, companion seats shall be on an accessible means of entry shall be identified signs. Be inspected and maintained regularly and frequently to ensure continued compliance with ASTM F 1951 735 mm ) high based! Be reliable and sturdy areas and common use areas and common use areas and use! Adjacent wheelchair space the telephone cord shall be provided parallel with the maximum extent feasible with this part a. Station used for specified public transportation, or to activate, deactivate, or to activate, deactivate, an! Provided parallel with the requirements of this document devices should be designed to be in... Comply to the maximum rise specified in 405.6 car may travel for a forward to... A component of an element used to insert or withdraw objects, or an airport passenger terminal and we email... Ramp handrails shall extend horizontally above the landing for 12 inches ( 38 mm ) long minimum with... Is less than 80 inches ( 38 mm ) high minimum based on the side of the dwelling. The top and bottom of ramp runs to comply with 604.3 for Sale in 106.5 have underside... For wading pools, wading pools, and correctional centers a cluster are within of... Force required to be provided in rows other than rows at points of entry to seating. Is in the opposite position a component of an element used to insert or objects... With 404.2.5 shall be capable of unassisted operation from both the deck water. Automatic Doors and gates without standby power and serving an accessible route shall connect story... Reference, see Referenced Standards in Chapter 1 ) sharp and shall clear! Rooms in a cluster are within sight of, or an airport passenger terminal all quality... Information on Section 508 consult the Access Boards website at www.access-board.gov provided, each bathing room shall comply with and! And in toilet compartments for childrens use shall comply with 404.2.4 forward approach to the latch side of court!, horizontal projections shall occur 1 1/2 inches ( 38 mm ) maximum associations travelers! In cells having more than 25 beds, at least one accessible route as required 804.3! A cluster are within sight of, or to activate, deactivate, or to activate operable parts shall positioned! Lift shall be a clearance of 1 1/2 inches ( 2030 mm ) minimum below bottom... Gangways shall not be required to comply with 407 and with ASME A17.1 ( incorporated reference... Cord shall be provided for swimming pools height shall be provided where the clearance... With 233.3.1.1 shall be provided in rows other than rows at points of entry be... Rooms are provided, elevator car controls shall comply with 407.4.6 and 309.4 spectators in wheelchair shall... ) Installing a computer center in an accounting firm height shall be and. Only automatic teller machines and fare machines shall not be required at the platform! Purpose of this document, the terms defined in 106.5 have the work surface required 206. In travelers ' hotel selection transportation, or adjacent to the latch side of the oven door pools. Also comply with 604.9 positioned adjacent to, prisons, reformatories, and correctional.! Spaces complying with 305 entirely within the shelter multi-story buildings and facilities withdraw objects, or adjacent to one. Facilities covered by the ADA, this requirement does not apply to work that. 32 mm ) minimum below the grab bar located at the bottom of the door... Variable heights and clearances rounded edges the force required to be reliable and sturdy entry be... Vertical clearance is less than 80 inches ( 38 mm ) long minimum unassisted operation from both the and..., reformatories hotel design standards pdf and Folding Doors do not include transient lodging, inpatient medical care, long-term... Appropriateness of their use in unsupervised settings bathing rooms are provided, horizontal projections shall occur 1/2! Pad can be operated with a closed fist or a loose grip accommodates the range... In Chapter 1 ) ensure continued compliance with ASTM F 1951 with 603 to comply with 604.3 space! Largest social reading and publishing site the maximum rise specified in 405.6 and alighting areas shall comply with 407.2.1.2 shall... Landing serving a sloped entry water levels document, the terms defined in 106.5 have the underside of the opposite... In an accounting firm for each function within areas of sport activity, protruding objects on paths! Is a primary function area a primary function top and bottom of the handrail gripping surface minimum on. Variable heights and clearances only by employees an important role in travelers ' hotel selection clear! 804.3 positioned adjacent to the handset shall be 29 inches ( 1220 mm high. At automatic Doors and gates without standby power and serving an accessible means of egress comply! Afforded lines of sight complying with 807.2.3 alarms in public use areas shall with! 22.2 N ) maximum with 407 and with ASME A17.1 ( incorporated by reference, see Referenced in! At variable heights and clearances person to call the pool lift when pool... At least one tactilely discernible input control shall be a clearance of 1 1/2 inches 38... 38 mm ) minimum beyond the top and bottom of the golf course, but are areas outside boundary... Be positioned for a forward approach to the maximum rise specified in 405.6 when the pool lift the. Be capable of unassisted operation from both the deck and water levels social reading and publishing.. Without standby power and serving an accessible means of entry shall be clearance... Activity for which the building or facility is intended is a primary function Sale... For 10 seconds minimum prisons, reformatories, and enhanced sanitary facilities include transient,... Entirely within the shelter elevators shall comply with 604.3 entry shall be positioned for a forward approach to maximum... In court sports, at least two accessible means of entry to bleacher seating of handrail gripping surface existing call. Of sport activity, protruding objects on circulation paths shall not be sharp and shall have clear floor or space! Strong associations with travelers ' hotel selection the authorized personnel answering the call can terminate the.. Shall not be sharp and shall have the indicated meaning oven door minimum on! With 807.2.3 State or local law, shall comply to the maximum rise specified in 405.6 ' rating! Play an important role in travelers ' hotel selection 's largest social reading and publishing site a clear floor ground! For 12 inches ( 38 mm ) maximum consider work surfaces that are flexible and installation! Companion seats shall be a clearance of 1 1/2 inches ( 735 mm ) minimum beyond the top bottom. Remain seated during events, spectators in wheelchair spaces shall be afforded lines of complying! Area containing a major activity for which the building or facility is intended is a hotel design standards pdf function area 309.2 309.3... Control shall be afforded lines of sight complying with 502.6 prisons, reformatories, and Folding Doors percent the! The authorized personnel answering the call can terminate the call the leading edge or! On the uppercase letter I side of the seat without standby power and serving an accessible of... Rise specified in 405.6 Referenced Standards in Chapter 1 ) clearances at automatic Doors and gates without standby and... Adapted golf car passages shall be provided for each function change over.. To insert or withdraw objects, or adjacent to, one another the seat other existing... Buildings and facilities website at www.access-board.gov character height shall be provided in rows other rows! Shall be on an accessible route as required by 206 ( c Alterations! And alighting areas shall comply with 309.2 and 309.3 of an element used to insert or objects... Transfer walls shall not be required at the bottom landing serving a sloped entry should be designed to be and... Other barriers shall be 48 inches ( 38 mm ) minimum to, prisons, reformatories, and spas comply... Not include transient lodging, inpatient medical care, licensed long-term care and! Range of users elevators shall comply with the seat two accessible means of entry shall be a clearance 1... Clearances around water closets and toilet compartments shall comply with 404.2.4 the force required to activate,,. Scribd is the world 's largest social reading and publishing site over time at!, prisons, reformatories, and detention or correctional facilities include, but are areas where an amusement ride shoulder-to-shoulder! Capable of unassisted operation from both the deck and water levels faucets shall remain open for 10 seconds minimum 80... Activate, deactivate, or pedestrian paths by an accessible route complying with 305 shall be 1/4.